防爆手电门
Applications
The XAW-P range of pendant control stations is suitable for  all kind of
industry where an explosive atmosphere may be present. This range  is
certifi ed ATEX II 2 GD
General specifi cations
Material： Metal, Rubber and GRP
IP Rating ：IP65  according to IEC 60529
Temperature： -20°C to +60°C (without lighting  functions)
-20°C to +50°C (with lighting functions)
Approvals： ATEX -  INERIS 03ATEX0122
Standards： Cenelec EN50014, EN50018,  EN50019,
EN50028,EN500281-1-1
Ex-Code：  Ex II 2 GD - EEx ed IIC / EEx emd  IIC
Mounting： Assembly of components only by Technor
Connection： Screw  clamp terminals
From 1 x 0,5 mm² cable to 2 x 1,5 mm² cable
(with or  without ferrule)
Cable entry capacity for： Ø10 to Ø22 mm cable
Use of each unit must be solely limited to its intended purpose
These  devices must be installed, used and maintained in accordance with:
- Standard  EN 60 079-14 (electrical installations and gaseous explosive
atmosphere)
-  Standard EN 60 079-17 (inspection and maintenance in hazardous areas)
-  Standard EN 50 281-1-2 (electrical apparatus for use in the presence  of
combustible dust. Part 1-2: electrical apparatus protected by  enclosures
– Selection, installation and maintenance).
- Decrees, orders,  laws, directives, circulars of applications, standards,
regulations and any  other document about their installation’s place.
We cannot accept any  responsibility for failure to observe these regulations
Important:
Approved and qualifi ed staff must carry out device  installation, assembling,
connection, operation, maintenance and  repairing.
The function of these products must be respected.
«Liability  for manufacturer traceability is ensured at the fi rst known  delivery

destination.»