▷ 产品细节：20-HIM-A6 人机界面模块(HIM) 用于改进和有效地与主机驱动器交互

艾伦-布拉德利20-HIM-A6是一个人机界面模块(HIM)。这是NEMA 1型HIM，与Allen-Bradley PowerFlex 7级驱动器一起使用。该组件有一个完整的数字键盘和动态软键，用于改进和有效地与主机驱动器交互。该组件支持欧洲、英语和亚洲语言，特别是英语、葡萄牙语、法语、意大利语、德语、西班牙语和荷兰语。

20-HIM-A专门兼容使用PowerFlex 753驱动器、PowerFlex 755驱动器、PowerFlex 755TL驱动器、PowerFlex 755TR驱动器、PowerFlex 755TM通用总线逆变器、PowerFlex 755TM总线电源、具有标准或增强控制的PowerFlex 70驱动器、具有标准或矢量控制的PowerFlex 700驱动器、PowerFlex 700H驱动器、具有或第二阶段控制的PowerFlex 700S驱动器、具有700矢量控制或700S控制的PowerFlex 700L驱动器

20-HIM-A6安装在驱动器前面板上主机驱动器提供的挡板上。它连接到驱动器端口1，以将HIM集成到主机驱动器。此外，20-HIM-A6也可以插入位于主机驱动器底部的驱动器端口2。这可以通过PowerFlex 750和PowerFlex 7类驱动器来实现。

20-HIM-A6支持驱动外设接口(DPI)协议，传输速度为125 Kbps或500 Kbps。它在12V DC下的功耗为140 mA，由主机驱动提供。

20-HIM-A6接口采用全数字键盘，具有集成的导航功能，可轻松配置和监控变频器以及连接的外围设备。20-HIM-A6接口具有更好的键盘触摸响应和改进的触觉响应，可高效无误地输入数据。20-HIM-A6界面旨在为用户提供更直观的访问，新的菜单结构提高了设备的运行效率。20-HIM-A6接口具有动态软键，可根据屏幕上的数据更改驱动器的功能或名称。它采用可定制的驱动监控，在过程屏幕上显示为列表。20-HIM-A6接口具有新的闪烁LCD屏幕，在出现故障或检测到警报时提供增强的可视性。20-HIM-A6接口安装在驱动器正面的挡板或驱动器端口1中。为了支持手持操作，20-HIM-A6接口安装在驱动器控制盒底部附近的驱动器端口2中。

▷ 联系我们

➤何姗姗（销售经理）➤邮箱 ：sales ➤QQ ： ➤电话/微信 ：+86-

The Allen-Bradley 20-HIM-A6 is a Human Interface Module (HIM). It is a NEMA Type 1 HIM that is used with Allen-Bradley PowerFlex 7 class drives. This component has a full numeric keypad and dynamic soft-keys for an improved and efficient interaction to the host drive. This component supports European, English and Asian languages, specifically, English, Portuguese, French, Italian, German, Spanish, and Dutch.

The 20-HIM-A is specifically compatible for use with PowerFlex 753 drives, PowerFlex 755 drives, PowerFlex 755TL drives, PowerFlex 755TR drives, PowerFlex 755TM common bus inverters, PowerFlex 755TM bus supplies, PowerFlex 70 drives with standard or enhanced control, PowerFlex 700 drives with standard or vector control, PowerFlex 700H drives, PowerFlex 700S drives with Phase I or Phase II control, PowerFlex 700L drives with 700 vector control or 700S control, PowerFlex 700AFE (Active Front End), PowerFlex Digital DC drives, PowerFlex 7000 drives, SMC Flex smart motor controllers and SMC-50 smart motor controllers.

The 20-HIM-A6 is installed to the bezel provided by the host drive located at the drive’s front panel. It is connected to the drive port 1 to fully integrate the HIM to the host drive. Additionally, the 20-HIM-A6 may also be plugged into the drives port 2 located at the bottom of the host drive. This may be done with PowerFlex 750 and PowerFlex 7 class drives.

The 20-HIM-A6 supports Drive Peripheral Interface (DPI) protocol with transmission speed of 125 Kbps or 500 Kbps. It has a power consumption of 140 mA at 12V DC supplied by the Host Drive.