ProSoft Technology的以太网/IP™到西门子工业以太网通信网关允许在罗克韦尔自动化pac和西门子S7 pac之间进行高速双向数据传输。两个独立的以太网端口允许每个协议驻留在单独的子网中，允许您在两个子网之间传递数据，而无需更改每个设备的IP地址。
此外，该网关还包括一个嵌入式EDS附加配置文件，可以简化集成并缩短调试时间。

两个独立的以太网端口允许每个协议驻留在单独的子网中。这允许您在两个子网之间传递数据，而无需将每个设备的IP地址更改为同一子网。
数据优先级:多个I/O连接允许您为状态和/或控制数据设置rpi。
包括一个嵌入式EDS附加配置文件，允许简化集成和减少调试时间。
网关包含一个SD卡插槽(SD卡可选)，用于存储配置文件。这可以用于灾难恢复。
通过模块开关进行安全模块配置(v1.04及更高版本)。
多达10,000个16位寄存器可用于交换大量数据。

ProSoft Technology’s EtherNet/IP™ to Siemens® Industrial Ethernet communication gateway allows high-speed bi-directional data transfers between Rockwell Automation® PACs and Siemens® S7 PACs. Two separate Ethernet ports allow each protocol to reside on separate subnets, allowing you to pass data between the two subnets without changing each device’s IP address.
In addition, the gateway includes an embedded EDS Add-On Profile, allowing for simplified integration and reduced commissioning time.

 Two separate Ethernet ports allow each protocol to reside on separate subnets. This allows you to pass data between the two subnets without changing each device’s IP address to be on the same subnet.
 Data prioritization: Multiple I/O connections allow you to set RPIs for status and/or control data.
 Includes an embedded EDS Add-On Profile, allowing for simplified integration and reduced commissioning time.
 Gateway includes a SD card slot (SD card optional) for storing configuration files. This can be used for disaster recovery.
 Secure module configuration via module switch (v1.04 and greater).
 Up to 10,000 16-bit registers can be used to exchange large amounts of data.