气动增压泵利用大面积活塞端的低压气体驱动而产生小面积活塞端的高压流体。可用于压缩空气及其它气体，输出气压可通过驱动气压无级调节。

The pneumatic booster pump is driven by the low-pressure gas at the large area piston end to produce the high-pressure fluid at the small area piston end. It can be used for compressed air and other gases. The output air pressure can be steplessly adjusted by driving air pressure.

　　FAT-V系列空气增压泵采用单气控非平衡气体分配阀来实现泵的往复运动，全部采用铝合金制造，部分件并做铝氧化处理保证了美观度，全部密封件均为优良产品，很大设计驱动气压为10bar，为了保证泵的寿命，建议驱动气压≤8bar此系列的驱动活塞直径为160mm。

Fat-v series air booster pump adopts single air control non-equilibrium gas distribution valve to realize the reciprocating movement of the pump. All parts are made of aluminum alloy, and some parts are treated with aluminum oxidation to ensure the aesthetics. All seals are imported high-quality products, and the maximum design driving air pressure is 10bar. In order to ensure the service life of the pump, it is recommended that the driving air pressure ≤ 8bar. The diameter of the driving piston of this series is 160mm.

维护简单：气动增压泵的零件及密封少，维护简单且成本低。相同系列泵的所有"O"型圈，维修包易损部件可相互替换，大大降低了维修成本。

　　1、保压期间无消耗能量

      2、 具有防爆功能，无需电力或电线连接

      3、 结构小巧，重量轻，不受天气变化影响

      4、 易实现自动控制

      5、 抗污染

      6、输出静态压力由驱动气压来五级调节

      7、 在满负载时非常容易进行启动、停止操作

      8、 易安装，操作。

Simple maintenance: the pneumatic booster pump has few parts and seals, simple maintenance and low cost. All "O" rings and vulnerable parts of the maintenance kit of the same series of pumps can be replaced with each other, greatly reducing the maintenance cost.

1. 1.No energy consumption during pressure maintaining
2. 2.With explosion-proof function, no power or wire connection is required
3. 3.Compact structure, light weight, not affected by weather changes
4. 4.Easy to realize automatic control
5. 5.Anti pollution
6. 6.The output static pressure is regulated in five stages by the driving air pressure
7. 7.It is very easy to start and stop at full load
8. 8.Easy to install and operate.