详细介绍

气动增压泵利用大面积活塞端的低压气体驱动而产生小面积活塞端的高压流体。可用于压缩空气及其它气体，输出气压可通过驱动气压无级调节。

The pneumatic booster pump is driven by the low-pressure gas at the large area piston end to produce the high-pressure fluid at the small area piston end. It can be used for compressed air and other gases. The output air pressure can be steplessly adjusted by driving air pressure.

该系列泵的驱动活塞直径为160mm，为单作用泵，所有单作用泵泵头均带有排气冷却

The drive piston diameter of this series of pumps is 160mm, which is a single acting pump. All single acting pump heads are equipped with exhaust cooling

注：PA进气压力 PB输出压力 PL驱动气压

气动增压泵技术参数：

Technical parameters of pneumatic booster pump:

小提示：压缩比=大活塞面积/小活塞面积=输出压力/驱动压力      

Tip: compression ratio = large piston area / small piston area = output pressure / drive pressure

缩小：      PL=驱动压力            PA=泵入口压力               PB=输出压力

Reduction:  PL = driving pressure    PA = pump inlet pressure      Pb = output pressure